The Quantum Composers 9520 series is an advanced digital delay generator capable of producing precisely timed electronic signals. These electronic signals can serve as a master clock source for experiments where a large number of actions must be synchronised in time. The 9520 series can also be synchronised or gated by an external trigger source, such as a laser sync out signal.
Key Features
– 250 ps Timing Resolution
– < 50 ps Channel to Channel Jitter
– 2, 4, or 8 Fully Independent Channel Outputs
– Benchtop Design- Wide Variety of Channel Output Option
s- Free LabVIEW Drivers
– 2 Year Warranty
https://www.quantumcomposers.com/pulse-delay-generator-9520
| Specifications |
9520 Series |
| Models |
| 9522- 1 Module, 2 independent outputs |
Input Modules- 2 inputs(1 trigger input/1 gate input? Configuration storage slots- 12 Memory slots (Automatically saves current configuration on front panel power down.) |
| 9524- 2 Modules, 4 independent outputs |
| 9528- 4 Modules, 8 independent outputs |
| CHANNEL OUTPUT CHOICES (comes in sets of 2 channels/module) |
| AT20 (Standard) |
TTL/ 2-20 V output |
| AT35 (Optional) |
TTL/35 V high voltage output module |
| AT45 (Optional) |
4-45 V high voltage, long PW, output module (Limited to 4 channels) |
| L82 (Optional) |
823nm, optical output module |
| L130 (Optional) |
1300nm optical output module |
| TZ50 (Optional) |
High current TTL/CMOS (for driving 50 ohm loads) & adjustable output module |
| TZ35 (Optional) |
Dual channel, high current TTL/CMOS (for driving 50 ohm loads) & 35 V high voltage output module |
| INPUT MODULES |
| IA15 (Standard) |
Dual channel, 1 trigger/1 gate input module optional |
| IL82 (Optional) |
Dual channel, 820nm optical input module |
| IL130 (Optional) |
Dual channel, 1300nm optical input module |
| INTERNAL RATE GENERATOR |
| Rate |
0.0002 Hz to 20.000 MHz |
| Resolution |
10ns |
| Accuracy |
1ns + 0.0001 x period |
| Jitter |
<50ps channel to channel |
| Settling |
1 period |
| Burst mode |
1 to 9,999,999 pulses |
| Timebase |
100 MHz, low jitter PLL |
| Oscillator |
50 MHz, 25ppm |
| System Output Modes |
Single shot, burst, duty cycle, continuous |
| Pulse control modes |
Internal rate generator, external trigger, external gate |
| PROGRAMMABLE TIMING GENERATOR |
Channel output modes
Control modes |
Single shot, burst, duty cycle, normal internally triggered, externally triggered and external gate
each channel may be independently set to any of the modes |
| Output multiplexer |
Timing of an/all channels may be multiplexed to any/all outputs |
| Wait function |
0 to 9,999,999 pulses |
| Timebase |
Same as internal rate generator |
| Delays |
| Range |
0-1000s |
| Accuracy |
1ns + .0001 x setpoint |
| Resolution |
250 ps |
| Pulse inhibit delay |
<120ns typical |
| Output inhibit delay |
<50ns typical |
| MODULE SPECIFICATIONS |
| TTL/ADJUSTABLE DUAL CHANNEL OUTPUT MODULE (standard) |
| Output impedance |
50 ohm |
| TTL/CMOS MODE |
| Output level |
4.0 V typ into 1 kohm |
| Rise time |
3ns typ |
| Slew rate |
>0.5 V/ns (10%-90%) |
| Jitter |
50ps RMS channel to channel |
Laser timing, Equipment synchronisation, Master clock,